JLG 943 (G9-43A), Fuel telehandler 43′ 9,000 lbs

The JLG 943 (G9-43A) is a telehandler with 12V voltage, 63A alternator and 810A cold cranking battery at 0°F. It has a Dana VDT12000 Powershift transmission with torque converter and 4 forward gears and 3 reverse gears. It has inboard wet disc brakes at the front and rear axle, as well as a wet disc spring applied parking brake on the front axle.

The truck also features a ROPS/FOPS certified structure with an adjustable seat and horn, forward, neutral and reverse lever to the left of the steering column. It has 4 steering wheels, power steering with manual override and operator selectable 4 wheel circle, 4 wheel crab and 2 front wheels.

The cart is equipped with a hydraulic-tool system with a tandem gear pump, a system capacity of 40 gal (151.4 L) and lift, crowd, tilt and swing cylinders that have a hold valves to prevent load drop in the event of pipe failure.

Check prices and

Category Tags , ,

Description

Performance

Rated Capacity
At 24 in. (610 mm) load center,
9,000 lb (4,082 kg)
Maximum Lift Height
43 ft (13.1 m)
Frame Leveling
10 degrees
Lift Speed (boom retracted)
Up: 12.5 sec
Down: 8 sec
Boom Speed
Extended: 15 sec
Retracted: 7 sec
Travel Speed Forward
19.5 mph (31.4 kmph)
Drawbar Pull (loaded)
19,200 lb (8,709 kg)
Operating Weight
With 48 in. Carriage and Forks
25,907 lb (11,751 kg)

Standard Specifications

Engine
Make and Model Cummins QSB3.3T
Fuel No. 2 Diesel
Cycles 4
No. of Cylinders 4
Displacement 202 cu in (3.3 L)
Rated Speed 2,400 rpm
Max. Gross BHP 99 hp (74 kW)
Fuel Tank 38 gal (141 L)
Engine Filters
Two-stage dry air cleaner — centrifugal
pre-cleaner with continuous dust ejector
and replaceable dry filter element.
Visual service indicator.
Replaceable element-type fuel filter/water
separator. Full-flow replaceable-element
engine oil filter.
Electrical System
Voltage: 12V
Alternator: 63 amp
Battery: 810 cold cranking amps at 0°F
Transmission
Dana VDT-12000 powershift with
torque converter. 4-speed forward
and 3-speed reverse.
Neutral start switch (park brake must
also be engaged to start).
Full time 4-wheel drive.
Directional and gear change control on single
steering column mounted lever.
Axles
Trunnion mounted planetary 55° steer axles.
Integral steer cylinder.
High bias limited slip differential on front axle.

Service Brakes
Inboard wet disc brakes on front and
rear axles.
Parking Brakes
Wet disc spring-applied hydraulic release
on front axle.
Light on dash indicates when brake is on.
Tires
Standard: 370/75-28.
Cab
Certified ROPS/FOPS structure, adjustable
seat and horn.
Forward, neutral, reverse lever on left of
steering column.
Steering 4-Wheel
Power steering with manual backup.
Operator selectable 4-wheel circle, 4-wheel crab,
2-wheel front.
Instruments
Volt meter, hourmeter, engine oil pressure gauge,
fuel gauge, water temperature gauge.
All gauges protected by clear acrylic cover.
Controls
Grouped for operator comfort and convenience.
Boom lift and crowd on single joystick.
Right-hand tilt and sway lever.
Foot throttle.
Hydraulic System-Implement
Tandem gear pump.
40 gal (151.4 L) system capacity.
8 micron filter with visual service indicator and
suction strainer.
Lift, crowd, tilt and sway cylinders have holding
valves intended to prevent dropping of load in the
event of hose failure.
Auxiliary Hydraulic Circuit
Used for all attachments equipped with
cylinders or other hydraulic components.
Consists of valves, controls and hydraulic lines.

Accessories and Options

Enclosed Cab
Air Conditioning
Auxiliary Electrics
Arctic Package
Work Lights
Road Lights
Rotating Beacon
Pintle Hook
Brick Guard
Fenders
Tires
    Foam-Filled
    Solid

Attachments

Standard Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Side-Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Swing Carriage
72 in. (1.8 m); 90 degrees
Dual Fork Positioning Carriage
Sheet Material Adapter
Tower
8 ft (2.4 m); 50 in. (1.3 m) Standard or
Side-tilt Carriage*
Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)
2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
Material Bucket
72 in. (1.8 m), 1.0 cu yd (0.76 m3)
96 in. (2.4 m), 1.5 cu yd (1.15 m3)
102 in. (2.6 m), 2.0 cu yd (1.53 m3)
Grapple Bucket
96 in. (2.4 m), 1.75 cu yd (1.34 cu m)
Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
15 ft (4.6 m), 2,000 lb (907 kg) capacity
12 ft (3.7 m) with winch,
2,000 lb (907 kg) capacity
Fork Mounted Work Platform
8 ft (2.4 m), 1,000 lb (455 kg) capacity
Lifting Hook

*Requires auxiliary electrics

Additional information

Brand

Engine Model

Rated Capacity

4.50 t | 9,000 lb

Tire Type

Type of energy

Diesel

Drive Speed

19,5 mi/h (31,4 km/h)

Width

Weight

Turning Radius (Outside)

Fuel tank capacity

Ground Clearance

Wheelbase

Maximum Lift Height

Drawbar pull

9.60 t | 19,200 lb

Chassis leveling

10°

boom speed

15 s/7 s

Length (without forks)

237 in. (6.02 m

Height

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Monday - Friday

5 AM - 8 PM

suite 101
Quebec J6X 4R1, Canada

Monday - Friday

5 AM - 8 PM

suite 101
Quebec J6X 4R1, Canada

Rough Terrain Forklift Operator Certification

This formation understand of the presentations in class, of the exams written, of the exercises practice And of the sessions of tests of skill. The section d'instructions with concentrate on the information important required For to use in all security and chariot elevator on and terrain accident. The part practical offer the possibility of put in practical THE SKILLS In and environment on below l'observation direct And THE advice of a instructor expert. THE SKILLS of the operators are evaluated about report to standards of the industry. This formation is not not specific has a brand or has and model, more covers THE concepts common has the plupart of the types of chariots elevators All terrain. - Duration: 3.5 hours + practical assessment - Expiration : 3 ans

Training topics

After to have follow up This programme of formation, YOU will be in measure of demonstrate your knowledge And SKILLS In THE areas following : Forklift Basics on Rough Terrain Rules and Regulations Types The main parts and their functions Security systems Inspection before use Safe operating procedures Limitations Hazards and controls This programme of formation with concentrate on THE needs of the « users finals » And, a times finished, will provide and certificate of operator And a map  wallet what has day For each device. A note minimal of 70 % East required For succeed the test theoretical. It applies to standards And regulations Canadian And American. - Duration: 3.5 hours + practical assessment - Expiration : 3 ans