JLG 80SL, 80′ Fuel Scissor lift

The JLG 80SL is a lifting platform with four-wheel drive, a swinging rear axle and a working height of up to 86 feet. She also features a single-feed deck extension, self-leveling automatic outrigger system, folding handrails and proportional drive control. The machine is mobile and removable, has a platform console box and an engine distress warning system. It is also equipped with numerous accessories and options, such as a descent alarm and a flashing orange beacon. The LIFTLUX triple scissor arm design offers increased productivity and improved terrain capability with automatic self-leveling outriggers for improved stability in rough terrain.

Check prices and



Rated Capacity
At 24 in. (610 mm) load center, 9,000 lb (4,082 kg)
Maximum Lift Height
43 ft (13.1 m)
Frame Leveling
10 degrees
Lift Speed (boom retracted)
Up: 12.5 sec
Down: 8 sec
Boom Speed
Extended: 15 sec
Retracted: 7 sec
Travel Speed Forward
19.5 mph (31.4 kmph)
Drawbar Pull (loaded)
19,200 lb (8,709 kg)
Operating Weight
With 48 in. Carriage and Forks 25,907 lb (11,751 kg)

Standard Specifications

Make and Model Cummins QSB3.3T
Fuel No. 2 Diesel
Cycles 4
No. of Cylinders 4
Displacement 202 cu in (3.3 L)
Rated Speed 2,400 rpm
Max. Gross BHP 99 hp (74 kW)
Fuel Tank 38 gal (141 L)
Engine Filters
Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element.
Visual service indicator.
Replaceable element-type fuel filter/water separator. Full-flow replaceable-element engine oil filter.
Electrical System
Voltage: 12V
Alternator: 63 amp
Battery: 810 cold cranking amps at 0°F
Dana VDT-12000 powershift with torque converter. 4-speed forward and 3-speed reverse.
Neutral start switch (park brake must also be engaged to start).
Full time 4-wheel drive.
Directional and gear change control on single steering column mounted lever.
Trunnion mounted planetary 55° steer axles.
Integral steer cylinder.
High bias limited slip differential on front axle.

Service Brakes
Inboard wet disc brakes on front and
rear axles.
Parking Brakes
Wet disc spring-applied hydraulic release on front axle.
Light on dash indicates when brake is on.
Standard: 370/75-28.
Certified ROPS/FOPS structure, adjustable seat and horn.
Forward, neutral, reverse lever on left of steering column.
Steering 4-Wheel
Power steering with manual backup.
Operator selectable 4-wheel circle, 4-wheel crab,
2-wheel front.
Volt meter, hourmeter, engine oil pressure gauge,
fuel gauge, water temperature gauge.
All gauges protected by clear acrylic cover.
Grouped for operator comfort and convenience.
Boom lift and crowd on single joystick.
Right-hand tilt and sway lever.
Foot throttle.
Hydraulic System-Implement
Tandem gear pump.
40 gal (151.4 L) system capacity.
8 micron filter with visual service indicator and suction strainer.
Lift, crowd, tilt and sway cylinders have holding valves intended to prevent dropping of load in the event of hose failure.
Auxiliary Hydraulic Circuit
Used for all attachments equipped with cylinders or other hydraulic components.
Consists of valves, controls and hydraulic lines

Accessories and Options

Enclosed Cab
Air Conditioning
Auxiliary Electrics
Arctic Package
Work Lights
Road Lights
Rotating Beacon
Pintle Hook
Brick Guard


Standard Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Side-Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Swing Carriage
72 in. (1.8 m); 90 degrees
Dual Fork Positioning Carriage
Sheet Material Adapter
8 ft (2.4 m); 50 in. (1.3 m) Standard or Side-tilt Carriage*
Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)
2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
Material Bucket
72 in. (1.8 m), 1.0 cu yd (0.76 m3)
96 in. (2.4 m), 1.5 cu yd (1.15 m3)
102 in. (2.6 m), 2.0 cu yd (1.53 m3)
Grapple Bucket
96 in. (2.4 m), 1.75 cu yd (1.34 cu m)
Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
15 ft (4.6 m), 2,000 lb (907 kg) capacity
12 ft (3.7 m) with winch,
2,000 lb (907 kg) capacity
Fork Mounted Work Platform
8 ft (2.4 m), 1,000 lb (455 kg) capacity
Lifting Hook

*Requires auxiliary electrics

Additional information


Overall Length


Maximum Drive Height

Tire Type

Tire Size

Type of energy


Expansion capacity

0.75 t | 1,650 lb

Hydraulic tank capacity


Rise/lower time

Turning Radius (Inside)

Turning Radius (Outside)

Diesel motor

Platform Capacity

Fuel tank capacity

Platform size

2.50 m x 5.35 m | 8.20 ft x 17.55 ft


Overall Width

Platform height, raised

24.49 m | 80 ft

Platform height, lowered

3.10 m | 10 ft


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Monday - Friday

5 AM - 8 PM

suite 101
Quebec J6X 4R1, Canada

Monday - Friday

5 AM - 8 PM

suite 101
Quebec J6X 4R1, Canada

Rough Terrain Forklift Operator Certification

This formation understand of the presentations in class, of the exams written, of the exercises practice And of the sessions of tests of skill. The section d'instructions with concentrate on the information important required For to use in all security and chariot elevator on and terrain accident. The part practical offer the possibility of put in practical THE SKILLS In and environment on below l'observation direct And THE advice of a instructor expert. THE SKILLS of the operators are evaluated about report to standards of the industry. This formation is not not specific has a brand or has and model, more covers THE concepts common has the plupart of the types of chariots elevators All terrain. - Duration: 3.5 hours + practical assessment - Expiration : 3 ans

Training topics

After to have follow up This programme of formation, YOU will be in measure of demonstrate your knowledge And SKILLS In THE areas following : Forklift Basics on Rough Terrain Rules and Regulations Types The main parts and their functions Security systems Inspection before use Safe operating procedures Limitations Hazards and controls This programme of formation with concentrate on THE needs of the « users finals » And, a times finished, will provide and certificate of operator And a map  wallet what has day For each device. A note minimal of 70 % East required For succeed the test theoretical. It applies to standards And regulations Canadian And American. - Duration: 3.5 hours + practical assessment - Expiration : 3 ans